- Library & Technology
- Hours & Locations
- Library Collections
- Library Research
- Technology Support
- Getting Started
- About Us
- Friends of the Library
FND-120 Equipment Instructions
Founders 120 Lecture Hall
Classroom Rows W/ Tables
I S:C D Player(2)
I S:Computer, Macintosh
I S:Laserdisc Player(2)
I S:Microphone Lectern
I S:Projection Screen(3)
I S:Projector, Film, 16 M M
I S:Projector, L C D
I S:Projector, Slide(2)
I S:Projector, Transparency
I S:V C R, Multi-country
I S:V C R, U.S.A. Only
I S:Wellesley College Video Network (W C V N)
The Crestron Touch-Screen Panel is fixed on the instructor desk. Touch the screen to activate and choose your source (e.g., DVD, VHS, Mac, Laptop).
The drapes can be opened or closed using the affixed instructor's Crestron control panel on the instructor's desk or using the control panel marked Window Shades located on the wall behind the instructor's desk.
- High, All on
- Med, Dimmed recessed lighting (adequate for note-taking)
- Low, Dimmed recessed lighting (not adequate for note-taking)
- Off, All off
Use the Crestron Touch-Screen Panel to adjust the volume.
Once a source is selected on the Crestron Remote Control, the projection screen will automatically drop down. Alternatively, use the Up/Down button.
Turning on the Projector
Select a media source on the Crestron Touch-Screen Control Panel. If the projector was off, it will turn on at this point. It may take up to a minute to reach full brightness. The projection screen will lower automatically.
Projecting from the Mac
Confirm the Mac is on. On the Crestron Touch-Screen Panel, select MAC.
Projecting from a Laptop
- Locate the VGA/audio cables on the instructor desk or in the equipment rack drawer. Connect one end of cables to the laptop and the other end to the VGA connection.
- Press the Laptop button on the Crestron Touch-Screen Control Panel to display the laptop screen.
Projecting from the VCR
Insert a VHS tape into the VCR in the rack. Select Standard VHS on the Crestron Touch-Screen Panel. Use the touch panel to play, pause, rewind etc.
Projecting from the DVD/LaserDisc player
Select the DVD/LD source button on the Crestron Touch-Screen Control Panel. Insert a disc into the player in the equipment rack. Use the touch panel's buttons: play, pause, stop, rewind, chp rev, chp adv, frame rev, etc. To select a specific track, use the numeric key pad.