- Library & Technology
- Hours & Locations
- Library Collections
- Library Research
- Technology Support
- Getting Started
- About Us
- Friends of the Library
JAC-247 Equipment Instructions
Jewett Art Center 247 Art Studio
I S:Computer, Macintosh(13)
On the equipment rack, the Extron Switcher Panel has four active buttons for selecting source inputs. Press the respective button for the source you intend to use.
Turning on the Projector
Locate the Extron Switcher. Press and hold for 5 seconds the Display Power button to turn on the projector. The Display Power button will illuminate and the projector will take approximately 45 seconds to reach full brightness.
The projection screen must be pulled down manually.
Projecting from the Mac
Confirm the Mac is on. Select the Mac button on the Extron Switcher.
Projecting from a Laptop
- Locate the VGA/audio cables on the instructor desk and connect to the laptop.
- Press the Front Panel Input button on the Extron switcher to display the laptop screen.
Rotate the knob Master on the Shure Stereo mixer located in the equipment rack.
Projecting from the VCR
Insert the videotape. Press the VHS button on the Extron Switcher. Use the remote or the VCR's on board controls to play, pause, rewind, etc.
Projecting from the DVD/CD player
Insert the disc. Press the DVD button on the Extron Switcher. Use the DVD remote or the onboard controls to play the disc.
Audio connection for Midi Workstation
Connect the two 1/4" male plugs to the Midi station. Raise or lower the volume using the Shure stereo mixer.