- Library & Technology
- Hours & Locations
- Library Collections
- Library Research
- Technology Support
- Getting Started
- About Us
- Friends of the Library
LIB-209 Equipment Instructions
Margaret Clapp Library LTS Conference Room 209
Conference Table (Seminar Rm)
I S:Computer, Macintosh
I S:Computer, Windows
I S:V C R, U.S.A. Only
On the equipment rack, the Extron Switcher Panel has four active buttons for selecting source inputs. Press the respective button for the source you intend to use.
Turning on the Projector
Locate the Extron Switcher. Press and hold for 5 seconds the Display Power button to turn on the projector. The Display Power button will illuminate and the projector will take approximately 45 seconds to reach full brightness.
To raise or lower the projection screen, press the Screen UP or Screen DOWN buttons on the Extron Switcher, or use the screen's Up and Down controls on the wall next to the equipment rack.
Projecting from the Mac
Confirm the Mac in the equipment rack is on (power button is lit). Select the Mac button on the Extron Switcher.
Projecting from the PC
Confirm the PC is on (power button is lit). Select the PC button on the Extron Switcher.
Projecting from a Laptop
Locate recessed cable cubby in the conference table, which contains a VGA cable and power outlet. Connect laptop to VGA cable and turn on laptop. On the Extron Switcher, select Laptop.
Rotate the knob Volume on the Extron Switcher.
Projecting from the VCR
Insert the videotape into the VCR. Press the VCR button on the Extron Switcher. Use the VCR's remote or onboard controls to play, pause, stop, etc.
Watching a Channel on WCVN (Cable TV)
Press the WCVN button on the Extron Switcher. To change channels, use the Up and Down buttons on the TV tuner in the rack.