SCI-200A Equipment Instructions

Formal Name: 
Science Center Geoscience 200A GIS Lab
Classroom Computer - PC
Max Capacity: 

I S:C D Player
I S:Computer, Macintosh
I S:Computer, Windows
I S:Document Camera
I S:D V D Player, U S A Only
I S:Projection Screen
I S:Projector, L C D
I S:V C R, U.S.A. Only
I S:Wellesley College Video Network (W C V N)

AV Controls

The Crestron Remote Control can be found on the instructor desk.  Look for the black remote with green, blue, yellow, and red buttons.

Turning on the Projector

Once a source is selected on the Crestron Remote Control, the projector will turn on automatically.  Note it may take up to a minute to reach full brightness.

Projection Screen

Once a source is selected on the Crestron Remote Control, the projection screen will automatically drop down.  Alternatively, use the Up/Down button.


Light controls are located on the wall to the right of the instructor's desk.

Projecting from the PC

Confirm the PC is on (power button should be lit).  Press the green PC Comp button on the remote control.

Projecting from the Mac

Confirm the Mac is on.  Press the green Mac Comp button on the Crestron Remote Control.

Projecting from a Laptop

  • Locate the VGA/audio cables on the instructor desk or on top of the equipment rack.  Connect one end of cables to the laptop and the other end to the Computer connection on the front of the Extron Switcher.
  • Press the green Laptop button on the Crestron Remote Control to display the laptop screen.


To adjust the volume, use the yellow buttons on the Crestron Remote Control: Source Up, Source Down, or Mute.

Projecting from the VCR

Select the green VCR source button on the Crestron Remote Control.  Insert a tape into the VCR in the equipment rack.  Use the blue play, pause, stop, rewind and fast-forward buttons on the remote control.